VMware NSX: Install, Configure, Manage V6.4 Training

7254 Learners

The VMware NSX: Install, Configure, Manage [V6.4] training will teach you how to use firewall configurations, gateway services, and security services to optimize your NSX environment. It is known as the foundation for most of the other VMware technologies in the software-defined data center.

We, at Multisoft Systems, have designed this comprehensive training course for experienced system administrators, system engineers, and network administrators. The course we are offering details logical routing in order to enable the attendees for dynamically route between different virtual environments.

Upon the completion of this course, the candidates will be able to:
  • Configure NSX Edge firewall rules to restrict network traffic
  • Configure NSX distributed firewall rules to restrict network traffic
  • Configure NSX L2 bridging
  • Configure and use all main features of the NSX Edge services gateway
  • Configure and deploy NSX distributed router appliances to establish east-west connectivity
  • Configure and deploy NSX components for management and control
  • Describe basic NSX layer 2 networking
  • Configure an identity-aware firewall
  • Configure, deploy, and use logical switch networks
Target Audience:
  • System administrators
  • System engineers
  • Network administrators
Prerequisites
  • Knowledge of TCP/IP services
  • Understanding of enterprise switching and routing
  • Experience with firewalls and firewall rule sets
  • Understanding of concepts presented in the VMware Data Center Virtualization Fundamentals course
  • Understanding of the concepts presented in the VMware Introduction to Network Virtualization with NSX course

The VMware NSX: Install, Configure, Manage [V6.4] training will teach you how to use firewall configurations, gateway services, and security services to optimize your NSX environment. It is known as the foundation for most of the other VMware technologies in the software-defined data center.

We, at Multisoft Systems, have designed this comprehensive training course for experienced system administrators, system engineers, and network administrators. The course we are offering details logical routing in order to enable the attendees for dynamically route between different virtual environments.

Upon the completion of this course, the candidates will be able to:
  • Configure NSX Edge firewall rules to restrict network traffic
  • Configure NSX distributed firewall rules to restrict network traffic
  • Configure NSX L2 bridging
  • Configure and use all main features of the NSX Edge services gateway
  • Configure and deploy NSX distributed router appliances to establish east-west connectivity
  • Configure and deploy NSX components for management and control
  • Describe basic NSX layer 2 networking
  • Configure an identity-aware firewall
  • Configure, deploy, and use logical switch networks
Target Audience:
  • System administrators
  • System engineers
  • Network administrators
Prerequisites
  • Knowledge of TCP/IP services
  • Understanding of enterprise switching and routing
  • Experience with firewalls and firewall rule sets
  • Understanding of concepts presented in the VMware Data Center Virtualization Fundamentals course
  • Understanding of the concepts presented in the VMware Introduction to Network Virtualization with NSX course

VMware NSX: Install, Configure, Manage V6.4 Training Course Content

Module 1: Course Introduction

  • Introductions and course logistics
  • Review course objectives

Introduction to vSphere Networking

  • Describe VMware vSphere® networking components
  • Describe vSphere standard switches
  • Describe vSphere distributed switches

Module 3: Introduction to NSX

  • Describe the benefits of NSX
  • Identify NSX key use cases

Module 4: NSX Architecture

  • Describe the NSX architecture
  • Describe the cloud management, management control, and data planes of NSX
  • Identify the component interactions
  • Describe the VMware NSX® Controller™ cluster and its functions
  • Explain the NSX Controller workload distribution

Module 5: NSX Infrastructure Preparation

  • Explain the steps required for an NSX installation
  • Describe what is involved in planning an NSX deployment
  • Describe the NSX Controller cluster and deployment
  • Describe NSX Controller cluster high availability and load distribution
  • Explain how to deploy and configure the NSX Controller cluster
  • Explain the workflow involved in host preparation

Module 6: NSX Logical Switch Networks

  • Explain transport zones, VXLANs, and VXLAN tunnel end points (VTEPs)
  • Describe the procedure for preparing the infrastructure for virtual networking
  • Describe the configuration of vSphere distributed switches for VXLAN
  • Identify the components involved in NSX logical switching
  • Define VLANs for VXLAN

Module 7: NSX Logical Routing

  • Explain the east-west and north-south routingconcepts
  • Define the NSX distributed logical router
  • Explain the logical router, interfaces, and interface addresses
  • Describe the management and control plane interaction
  • Describe logical router deployment models and two-tier routing for east-west traffic
  • Explain the common topologies of an NSX Edge services gateway

Module 8: Advanced NSX Logical Routing

  • Describe how routers connect remote networks
  • Explain route redistribution methods
  • Describe less-than-or-equal (LE) and greaterthan-or-equal (GE) configurations
  • Describe routing event notification enhancements
  • Configure equal-cost multipath (ECMP) routing
  • Describe high availability for NSX Edge service gateways

Module 9: NSX L2 Bridging

  • Explain L2 bridging use cases
  • Describe software and hardware L2 bridging between VXLAN and VLANs
  • Discuss L2 bridging packet flows

Module 10: NSX Edge Services

  • Describe the NSX Edge Services
  • Explain how Network Address Translation (NAT)works
  • Explain NAT64
  • Explain the function of load balancing
  • Explain one-armed and inline load-balancing
  • architectures
  • Explain the DHCP and DNS services for NSX Edge

Module 11: NSX Edge VPN Services

  • Describe the NSX Edge VPN services
  • Describe the VPN use cases
  • Configure a L2 VPN on an NSX Edge instance
  • Configure an NSX Edge instance for IPsec VPN services
  • Explain NSX Edge SSL VPN-Plus services
  • Configure NSX Edge SSL VPN-Plus server settings
  • VMware NSX: Install, Configure, Manage

Module 12: NSX Security Services

  • Describe the policy enforcement of the distributed firewall
  • Describe virtualization context-awareness
  • Explain custom network and security containers
  • Describe the architecture of an NSX Edge firewall
  • Explain DHCP snooping
  • Explain ARP snooping

Module 13: NSX Advanced Security Services

  • Describe NSX SpoofGuard
  • Identify how tags enable dynamic security servicechains
  • Explain Service Composer groups, policies, and tags
  • Describe the Identity Firewall architecture
  • Explain Application Rule Manager
  • Explain how to create a monitoring session

Module 14: NSX Introspection Services

  • Describe the types of introspection services
  • Describe the installation and configuration of
  • Guest and Network Introspection
  • Summarize Guest and Network Introspection alarms, events, and audit messages

Module 15: Cross-vCenter NSX

  • Describe cross-vCenter features and use cases
  • Identify VMware NSX® Manager™ roles
  • NSX Controller cluster placement
  • Deploy universal logical networks
  • Explain the design considerations for crossvCenter NSX

Learning Partner

Drop Us a Query

+91 9810306956

Available 24x7 for your queries

VMware NSX: Install, Configure, Manage V6.4 Training Course Certificate

Our Training Certificates Get The Job Done

Multisoft Systems is the “one-top learning platform” for everyone.

Get trained with certified industry experts and receive a globally-recognized training certificate.

Multisoft Training Certificate Features :
  • Globally recognized certificate with complete name of the candidate
  • Course ID & Course Name
  • Certificate with Date of Issuance
  • Name and Digital Signature of the Awardee
certificate-sample

VMware NSX: Install, Configure, Manage V6.4 Corporate Training & Certification Program

Employee training and development programs are essential to the success of businesses worldwide. With our best-in-class corporate trainings you can enhance employee productivity and increase efficiency of your organization. Created by global subject matter experts, we offer highest quality content that are tailored to match your company’s learning goals and budget.

Learn from the experts

Customized Training

Be it schedule, duration or course material, you can entirely customize the trainings depending on the learning requirements of your workforce. You can even choose a trainer from our team of certified industry experts.

Learn from the experts

Expert Mentors

Get trained from our team of highly skilled and certified trainers, who are officially accredited professionals with relevant industry experience and adept in providing the knowledge and skills required to be successful.

Learn from the experts

360º Learning Solution

Engage your employees with our all-inclusive learning platform. Avail benefits of 24/7 access to the learning management system, industry-certified mentors, assessments & mock tests, real-time learning and more.

Learn from the experts

Learning Assessment

Check test score and performance with our skills analysis tools. Our detail scoreboard displays scores, areas of strength, detailed answer of questions and more for each employee.

Download Corporate Brochure

What Attendees are Saying

+91 9810306956

Available 24x7