CISCO CCNP Routing and Switching Training

Course 642-902 ROUTE: Implementing Cisco IP Routing

Implement an EIGRP Based Solution, given a Network Design and a set of Requirements

• Determine network resources needed for implementing EIGRP in a network.
• Create an EIGRP implementation plan.
• Create an EIGRP verification plan.
• Configure EIGRP routing.
• Verify EIGRP solution was implemented properly using show and debug commands.
• Document the results of EIGRP implementation and verification.

Implement a Multi-Area OSPF Network, given a Network Design and a set of Requirements

• Determine network resources needed for implementing OSPF on a network.
• Create an OSPF implementation plan.
• Create an OSPF verification plan.
• Configure OSPF routing.
• Verify OSPF solution was implemented properly using show and debug commands.
• Document results of OSPF implementation and verification plan.

Implement an eBGP Based Solution, given a Network Design and a set of Requirements

• Determine network resources needed for implementing eBGP on a network.
• Create an eBGP implementation plan.
• Create an eBGP verification plan.
• Configure eBGP routing.
• Verify eBGP solution was implemented properly using show and debug commands.
• Document results of eBGP implementation and verification plan.

Implement an IPv6 Based Solution, given a Network Design and a set of Requirements

• Determine network resources needed for implementing IPv6 on a network.
• Create an IPv6 implementation plan.
• Create an IPv6 verification plan.
• Configure IPv6 routing.
• Configure IPv6 interoperation with IPv4.
• Verify IPv6 solution was implemented properly using show and debug commands.
• Document results of IPv6 implementation and verification plan.

Implement an IPv4 or IPv6 Based Redistribution Solution, given a Network Design and a set of Requirements

• Create a redistribution implementation plan based upon the results from a redistribution analysis.
• Create a redistribution verification plan.
• Configure a redistribution solution.
• Verify that redistribution was implemented.
• Document results of a redistribution implementation and verification plan.
• Identify the differences between implementing an IPv4 and IPv6 redistribution solution.

Implement Layer 3 Path Control Solution

• Create a Layer 3 path control implementation plan based upon the results of the redistribution analysis.
• Create a Layer 3 path control verification plan.
• Configure Layer 3 path control.
• Verify that a Layer 3 path control was implemented.
• Document results of a Layer 3 path control implementation and verification plan.
• Implement Basic Teleworker and Branch Services
• Describe broadband technologies.
• Configure basic broadband connections.
• Describe basic VPN technologies.
• Configure GRE.
• Describe branch access technologies.

Course 642-813 SWITCH: Implementing Cisco IP Switched Networks

Implement VLAN Based Solution, given a Network Design and a set of Requirements.

• Determine network resources needed for implementing a VLAN based solution on a network.
• Create a VLAN based implementation plan.
• Create a VLAN based verification plan.
• Configure switch-to-switch connectivity for the VLAN based solution.
• Configure loop prevention for the VLAN based solution.
• Verify EIGRP solution was implemented properly using show and debug commands.

Implement a Security Extension of a Layer 2 Solution, given a Network Design and a set of Requirements

• Determine network resources needed for implementing a security solution.
• Create a implementation plan for the security solution.
• Create a verification plan for the security solution.
• Configure port security features.
• Configure general switch security features.
• Configure private VLANs.
• Configure VACL and PACL.
• Verify the Security based solution was implemented properly using show and debug commands.
• Document results of security implementation and verification.

Implement Switch Based Layer 3 Services, given a Network Design and a set of Requirements

• Determine network resources needed for implementing a Switch based Layer 3 solution.
• Create an implementation plan for the Switch based Layer 3 solution.
• Create a verification plan for the Switch based Layer 3 solution.
• Configure routing interfaces.
• Configure Layer 3 Security.
• Verify the Switch based Layer 3 solution was implemented properly using show and debug commands.
• Document results of Switch based Layer 3 implementation and verification.

Prepare infrastructure to Support Advanced Services

• Implement a Wireless Extension of a Layer 2 solution.
• Implement a VoIP support solution.
• Implement video support solution.

Implement High Availability, given a Network Design and a set of Requirements

• Determine network resources needed for implementing High Availability on a network.
• Create a High Availability implementation plan.
• Create a High Availability verification plan.
• Implement first hop redundancy protocols.
• Implement switch supervisor redundancy.
• Verify High Availability solution was implemented properly using show and debug commands.
• Document results of High Availability implementation and verification.

Course 642-832 TSHOOT: Troubleshooting and Maintaining Cisco IP Networks

Maintain and Monitor Network Performance.

• Develop a plan to monitor and manage a network.
• Perform network monitoring using IOS tools.
• Perform routine IOS device maintenance.
• Isolate sub-optimal internetwork operation at the correctly defined OSI Model layer.

Troubleshoot Multi Protocol System Networks

• Troubleshoot EIGRP.
• Troubleshoot OSPF.
• Troubleshoot eBGP.
• Troubleshoot routing redistribution solution.
• Troubleshoot a DHCP client and server solution.
• Troubleshoot NAT.
• Troubleshoot first hop redundancy protocols.
• Troubleshoot IPv6 routing.
• Troubleshoot IPv6 and IPv4 interoperability.
• Troubleshoot switch-to-switch connectivity for the VLAN based solution.
• Troubleshoot loop prevention for the VLAN based solution.
• Troubleshoot Access Ports for the VLAN based solution.
• Troubleshoot private VLANS.
• Troubleshoot port security.
• Troubleshoot general switch security.
• Troubleshoot VACLs and PACLs.
• Troubleshoot switch virtual interfaces (SVIs).
• Troubleshoot switch supervisor redundancy.
• Troubleshoot switch support of advanced services (i.e., Wireless, VoIP and Video).
• Troubleshoot a VoIP support solution.
• Troubleshoot a video support solution.
• Troubleshoot Layer 3 Security.
• Troubleshoot issues related to ACLs used to secure access to Cisco routers.
• Troubleshoot configuration issues related to accessing the AAA server for authentication purposes.
• Troubleshoot security issues related to IOS services (i.e.,finger, NTP, HTTP, FTP, RCP etc.) .